EzOSD On Screen Display Deans 5Hz

Cette version inclut les connecteurs Deans sur le capteur de courant. Simplement l'essentiel. Rien de complexe. A un prix raisonable !

The popular EzOSD, the plug-and-play OSD which is the favorite among serious FPVers. Tight integration with the EzUHF long range uplink via a digital bus that allows the pilot access to a rich set of telemetry data.

The FPV'ers OSD
FPV is coming of age, and its time for FPV equipment to come of age also. The EzOSD was created by FPVers with hundreds of hours of experience, after listening to the wishes of countless ‘Newbies’, and experienced pilots alike.

Simple Setup
Who wants to spent hours in front of a PC, or wading through a manual, to setup an OSD. The EzOSD’s on-screen menu system is integrated, and accessed using three simple buttons. No need to hook up, and configure a R/C transmitter/receiver to access the setup menus!

Sense
The EzOSD module may be used stand-alone, and will offer navigation, and basic voltage measuring capabilities. For Gas models, this is generally all that is required for safe FPV flight. The included 100A current sensor records not only the instantaneous current consumption, but also keeps track of the battery level, recording precisely the number of mAh consumed. Don’t be fooled by cheaper imitations which claim that a current sensor is not required!

Downlink
All sensor data and the GPS position of the model, is sent down a telemetry link 10x/sec. The EzAntennaTracker displays this, and steers a directional antenna to always point to your model. The free ‘Immersion Player’ requires a simple audio connection to your PC’s microphone input to show your plane’s position, Live, on a Google-Earth Map.

Comply
Its easy to exceed the maximum altitude, or distance, allowed for FPV (or any other flight) in your region. The EzOSD can be setup to warn you, when selected parameters are exceeded, for example, altitude > 150m. Support is also provided to comply with Amateur radio callsign broadcast requirements. The EzOSD can automatically broadcast your callsign periodically.

Key Features

    Crisp, readable display, in any lighting conditions
    Telemetry link to a groundstation, or Smart-Phone app (iTelemetryFPV)
    Full compatibility with the EzUHF uplink (digital connection)
    Simple to setup, 3 buttons on the OSD itself
    USB port for future upgrades

Simple Setup
Personne ne veut passer des heures devant son PC, ou perdre son temps dans un manuel, pour paramétrer un OSD. Le EzOSD inclu un paramétrage sur l'écran directement accessible via 3 boutons situés sur le module.

Il est facile de dépasser l'altitude maximum, ou la distance, permise pour le FPV (ou tout autre vol). Le Ez-OSD peut être paramétré afin de prévenir quand les paramètres sélectionnés sont dépassés, comme par exemple, une altitude supérieure à 150m.

• Texte précis, ombré pour assurer une bonne visibilité sur le ciel bleu, ou le couché de soleil hivernal.
• Mise en oeuvre facile.
• Design robuste, protection contre les inversions de polarité, protection de surtension.
• Possibilité de mise à jour du firmware sans programmeur PIC, un port USB standart est inclus.
• Alerte basse tension, capacité, trop haut, trop bas, etc...
• Commande possible de l'OSD via une voie libre du récepteur (eOSD control from a spare servo channel (optional).
• Menu système intuitif, avec boutons intégrés.
• Debriefing après vol, résumé du vol : altitude max, distance max, vitesse max, vitesse moyenne, distance parcourue, etc.
• GPS 5Hz.
• Capteur de courant 100A (2s-4s lipo, 6-17V).
• Auto-détection PAL/NTSC.